Search for Leroy-Somer product installation and maintenance manuals
FLSD 3-phase induction motors for atmospheres containing explosive gases and dust
- FLSD - Ex db & Ex db (eb) - Commissioning and maintenance guide
- Specific recommendations FLSD motor commissioning and maintenance
General & simplified manual D.C. motors
- General recommendations Addition to general manual ref. 5706
- Instruction manual
General recommendations
- General user guide for alternators and AVRs
- User guide for LSAH alternators (complement to general guide)
LS-LSES-FLSES-PLSES 3-phase induction motors
- General recommendations for storage and commissioning
- Instruction manual
LSE-FLSE 3-phase induction motors for atmospheres containing explosive gases and dust
- Instruction manual Addition to specific manual ref. 3606
- Specific recommendations (F)LSE - Ex e Addition to manuals ref. 1889 & 3614
LSN-FLSN 3-phase induction motors for atmospheres containing explosive gases and dust
- Commissioning and maintenance guide
- Specific recommendations Motor LSN - FLSN commissioning and maintenance
LSPX-FLSPX - LS-FLS 3-phase induction motors for atmospheres containing explosive dust
- Commissioning and maintenance guide - (F)LSPX -(F)LSES Zone 22
- Specific recommendations (F)LSPX-(F)LS Addition to manuals ref. 1889 & 3255
PMG Excitation system
Single bearing KAMAG generator with outboard exciter
Transport and storage Low voltage alternators
Two-bearing KAMAG generator with outboard exciter
(F)LS (ES, IA, MV, PX), FCR 3-phase asynchronous TEFV brake motors
400Hz High frequency alternator
A47 RBC
A49/50 Compound
AC generator Center air discharge
AC turbine generator
ACT Compound
ARCM Compound
ARCO A160 to A315
ARCT Compound
ARES alternator
- Instruction manual Compound
- Instruction manual MD35 - A2510-2810-3160-3560
AROK Compound
ARPI alternator
- Instruction manual A1322
- Instruction manual A2000-A2250
- Instruction manual LSA 41
- Instruction manual Shunt
- Instruction manual A1602
ARSE LSA 41 RS 152
ART SHUNT
ATEX alternator
Best practices for Variable Speed Guide to best practices for Motor-drive systems
- Guide to best practices - Motor-drive systems
BR & BL flanges Flanges for agitation/mixing
Brakes Patay Eddy-current
CAN D500 Digital regulator
Cba/Cb1700 Drive systems
CEC 90 A.V.R.
CEC 92 A.V.R.
CEX 82 A.V.R.
CF1 Brake motor
CLEVERAX LS-POS & LS-SYNCHRO
- Steering drive position Installation and maintenance
- Synchronizing multiple drives / Electrical shaft Installation and maintenance
CLS D.C. motors
Commander C200 Simple, reliable motor control
To access the full Commander C200 documents collection, click here
- Parameter Guide, Open-Loop Mode
- Parameter Guide, RFC-A mode (Rotor Flux Control)
- Power Installation Guide Sizes 5 and 6
- Power Installation Guide Sizes 1 to 4
- Power Installation Guide Sizes 7 and 10
- Quick start commissioning guide - Control C200/C300
- SI-I/O - User guide
- Step By Step Guide C200/C300 Frame sizes 1 to 4
- Step By Step Guide C200/C300 Frame sizes 5 to 9
Commander C300 To access the full Commander C300 documents collection, click here
- Parameter Guide, Open-Loop Mode
- Parameter Guide, RFC-A mode (Rotor Flux Control)
- Power Installation Guide Sizes 5 and 6
- Power Installation Guide Sizes 1 to 4
- Power Installation Guide Sizes 7 and 10
- Quick start commissioning guide - Control C200/C300
- SI-I/O - User guide
- Step By Step Guide Frame sizes 5 to 9
- Step By Step Guide C200/C300 Frame sizes 1 to 4
COMMANDER ID300 Integrated Drive for IMfinity® motors
- Field Keypad RTC - Installation, connection and cloning function
- General recommendations for storing and installing
- ID-SIZE1-Fieldbus -Installation and connection guide PROFIBUS, EtherCAT, Ethernet, Devicenet, CANopen and PROFINET RT
- ID-Size1-Keypad & ID-Size3-Keypad - Installation and connections guide
- Installation and quick start commissioning guide
- Parameter reference guide (html) Commander ID302
- Parameter reference guide(html) Commander ID300
- Quick user guide - Menu 0 with preset configurations Commander ID300/302
- User and Technical guide Commander ID300/302
Common frame motor generator set Brushless generator - Induction motor
Compabloc 1502-1503-1504 Drive systems
Compabloc 1701-1702-1703 Drive systems
Compabloc 2000 Drive systems
Compabloc 3000 Drive systems
- General recommendations Addition to general manual ref. 3520
- Installation
- Lubrication kit
- Maintenance
- Specific recommendations for dust atmospheres Addition to manuals ref. 2557 & 3520
- Specific recommendations for gas atmospheres Addition to manuals ref. 2557 & 3520
Compabloc B1 to F1 Drive systems
Compabloc B1-B3 Ã H2-H3 Drive systems
ControlReg200/200P Controller & AVR
- Alarms and parameters list - Instruction manual
- Engine interface communication - Instruction manual
- Instruction manual
CONVERSTAT Frequency changer
CPLS Drip-proof 3-phase induction motors
- General recommendations Addition to general manual ref. 4240
- Instruction manual
Cross current analyzer
CTIU Terminal Interface Unit
- CTIU User manual
- CTIU 50 Information sheet
- CTIU 100 Information sheet
- CTIU 110 Information sheet
D350 Digital AVR
- Instruction manual
- Kit SWITCH2D350 - Instruction manual
- Safety instructions
D510 C Digital regulator
- Instruction manual
- Safety instructions
D550 Digital AVR
- Current Booster Module CBM-20A - Instruction manual
- Dual cabinet MIS STD 461G - Instruction manual
- Dual plate - Instruction manual
- Dual plate Automatic-Manual - Instruction manual
- Instruction manual
- Interface CAN BUS - Instruction manual
- Kit SWITCH2D550 - Instruction manual
- Module EasyLog/EasyLogPS - Instruction manual
- Power System Stabilizer PSS - Instruction manual
- Safety instructions
D610 Digital regulator
D610 Dual plate Digital regulator
D630 Digital regulator
D630 Dual plate Digital regulator
D700 Digital AVR
- Current Booster Module CBM-20A - Instruction manual
- Dual plate - Instruction manual
- Instruction manual
- Power System Stabilizer PSS - Instruction manual
- Safety instructions
DIGIDRIVE SE 1/3-phase variable speed drive for induction motor 5.5 up to 37 kW
- Advanced user guide
- Instruction manual
DIGIDRIVE SK Variable speed drive 0.25 up to 132 kW
- Developed functions manual
- Getting started guide (sizes A to D)
- Getting started guide (sizes 2 to 6)
- Getting started guide - Addendum to guide ref. 4020 (size 3 only)
- Kit UL - Installation manual (type 1)
- LogicStick - Installation manual Ladder logic program and parameter cloning module
- Phase choke - Installation manual
- Quick start commissioning guide - Solution - Pumping
- SK-Braket - Installation manual Ground and cable braket
- SK-Keypad Remote - Installation manual LED keypad
- SM-Bipolar - Installation manual Analogue bipolar input module
- SM-CANopen - Installation manual Fieldbus module
- SM-CANopen - User guide Fieldbus module
- SM-DeviceNet - Installation manual Fieldbus module
- SM-DeviceNet - User guide Fieldbus module
- SM-EtherCAT - Installation manual Fieldbus module
- SM-EtherCAT - User guide Fieldbus module
- SM-Ethernet - Manual installation Fieldbus module
- SM-Ethernet - User guide Fieldbus module
- SM-I/O Lite, SM-I/O Timer - Installation manual Extra input/output module
- SM-I/O Lite, SM-I/O Timer - User guide Extra input/output module
- SM-Keypad LCD - Installation manual LCD keypad
- SM-Profibus DP-V1 - Installation manual Fieldbus module
- SM-Profibus DP-V1 - User guide Fieldbus module
- SmartStick - Installation manual Parameter cloning module
- Technical data guide
DIGISTART D2 & D3 Electronic soft starter 18 up to 1600 A
- DeviceNet module - Installation manual
- Digistart D2 remote keypad - Installation manual
- Digistart D2 remote keypad - User guide
- Digistart D3 keypad mounting kit - Installation manual
- Ethernet/IP & Profinet - Modbus TCP module - Notice d'installation
- Ethernet/IP module - User guide
- Finguer guards - Installation manual
- Hardware expansion card - Installation manual
- Modbus module - Installation manual
- Modbus module - User guide
- Modbus TCP module - User guide
- Profibus module - Installation manual
- Profibus module - User guide
- Profinet module - User guide
- USB module - Installation manual
- USB module - User guide
- User guide - DIGISTART D2
- User guide - DIGISTART D3
DIGISTART D4 & D5 Electronic soft starter 24 to 1250 A
- User guide - Digital soft starter D4
- User guide - Digital soft starter D5
DIGISTART DEC Electronic soft starter
DIGISTART STV 1312 Electronic soft starter
DIGISTART STV 2313 Electronic soft starter
DIGITAX HD Servo-drive 1,5 to 16 A (0,7 to 51 Nm)
To access the full documents collection, click here
- Installation and technical manual - M75X Series
- Parameter Guide, Open-Loop Mode M750 series
- Parameter Guide, Open-Loop Mode M751 series
- Parameter Guide, Open-Loop Mode M753 series
- Parameter Guide, RFC-A mode (Rotor Flux Control) M750 series
- Parameter Guide, RFC-A mode (Rotor Flux Control) M751 series
- Parameter Guide, RFC-A mode (Rotor Flux Control) M753 series
- Parameter Guide, RFC-S mode, M750 series
- Parameter Guide, RFC-S mode, M751 series
- Parameter Guide, RFC-S mode, M753 series
- Parameter Reference Guide (Regeneration) M750 series
- Parameter Reference Guide (Regeneration) M751 series
- Parameter Reference Guide (Regeneration) M753 series
- Quick start commissioning guide - Control - M751 Series
- Quick start commissioning guide - Control - M751 Series
- Quick start commissioning guide - Control - M753 Series
- Quick start commissioning guide - M75X Series
DIGITAX ST Servo-drive 1.1 up to 8 A
- Installation manual
- Quick start commissioning guide - Solution - Positioning
- SM-Applications Lite - Installation manual Applications Lite module
- SM-Applications, SM-Applications Plus - Installation manual Applications module
- SM-CANopen - Installation manual Fieldbus module
- SM-CANopen - User guide Fieldbus module
- SM-DeviceNet - Installation manual Fieldbus module
- SM-DeviceNet - User guide Fieldbus module
- SM-EtherCAT - Installation manual Fieldbus module
- SM-EtherCAT - User guide Fieldbus module
- SM-Ethernet - Installation manual Fieldbus module
- SM-Ethernet - User guide Fieldbus module
- SM-I/O 32 - Installation manual Extra input/output module
- SM-I/O Lite, SM-I/O Timer - Installation manual Extra input/output module
- SM-I/O Plus - Installation manual Extra input/output module
- SM-Interbus S - Installation manual Fieldbus module
- SM-Lon - Installation manual Fieldbus module
- SM-Profibus DP-V1 - Installation manual Fieldbus module
- SM-Profibus DP-V1 - User guide Fieldbus module
- SM-Register- Installation manual Fieldbus module
- SM-Sercos - Installation manual Fieldbus module
- Technical characteristics manual
Diode fault detector
Diodes failure detector A.V.R.
DMV 201 Unidirectional single-phase controller for D.C. motor
DMV 2321/2341 D.C. motor regenerative speed controller
DMV 2322/2342 D.C. motor regenerative speed controller
DMV 242 D.C. motor regenerative speed controller
DPM Digital Potentiometer Module
- DPM Technical Sheet Digital Potentiometer Module
Dual automatic voltage regulator
DVR100T Traction Digital voltage regulator
ED 38 Compound
EFMT - B3 or B5 Clutch
Electromechanical Manual Offer, Ranges, Determinations.
- Electromechanical Manual Offer, Ranges, Determinations. Variable speed and fixed speed. Efficiencies: Non IE, IE2, IE3. 0.06 to 110 kW
EM10 Excitation module
EM15 Excitation module
EM25 Excitation module
EMC 34 with capacitor
EMD 38 & ETD 38 with main field
EMT - B1 or B2 Clutch
EMT - B3 or B5 Clutch
EXC-DMV20/FXM5 Carte contrôleur d'excitation
Excitation sensor and reverse power relay
FAP Brake motor
FAP 2 Brake motors
FAP 2 - LSPX Induction motors for atmospheres containing explosive dust
FAST Brake motor
FB R Brake motor
FCO RO Decelerator brake motor
FCO-FCL-FCM Brake motor
FCO-FCM - M.E.G.2 Weathercock device
FCPL 40 Brake motor
FCPL 54, FCPL 60 & FCPL 60H Brake motor
- FCPL60H brake motor Installation guide
- Instruction manual
FCR - D.M.D.2 Remote brake release lock off
FDH Brake motor with hydraulic release
Field failure and out-of-step protection assembly (P/N 511-01111-25)
Field failure and out-of-step protection assembly (P/N 511-01111-26)
FM serie 100 Brake motor with electromagnetically controlled
FMC Brake motor
FMV 1003 Asynchronous motor for speed modulation
FMV 1103 Digital frequency controller for induction motors
FMV 1104 Digital frequency controller 1 phase
FMV 1104A Digital frequency controller to use ventilation
FMV 1105 Frequency inverter
FMV 1108 Frequency inverter
- Advanced user guide
- Instruction manual
FMV 2 - STB Motor for speed modulation
FMV 2105 Asynchronous motor for speed modulation
FMV 2107/2307 Digital frequency controller for induction motors
FMV 2303 Asynchronous motor for speed modulation
- Installation and maintenance - 1.5 M to 180 T
- Installation and maintenance - 220T to 400T parts 1&2
FMV 2304 Digital frequency inverter for induction motors
FMV 2305/2305 A Digital frequency inverter for induction motors
FMV 2306/2306 AS Digital frequency inverter for induction motors
- Instruction manual
- Precautions to be taken with FMV2306 100T & 2306 AS 120T
GEARLEC-TRACTELEC GT3-TF3/TM3 - Generator for agricultural tractor
GEARLESS E27 Gearless with central pulley
GEARLESS X2 X3 A.C. drive for lifts
GEARLESS X20 X30 X36 A.C. drive for lifts
GEARLESS X8 X13A X14 A.C. drive for lifts
GEARLESS XA2 A.C. drive for lifts
GEARLESS XAF1 A.C. drive for lifts
GEARLESS XAF2-6 A.C. drive for lifts
GEARLESS XAP A.C. drive for lifts
GEARLESS XAP1-CE Permanent magnet synchronous motor for commercial lifts
GEARLESS Z2-Z3 A.C. drive for lifts
GEARLESS Z4-Z6-Z20 A.C. drive for lifts
- Z4 - Z20 Installation and maintenance manual Warner brakes
- Z6 - Z20 Installation and maintenance manual Mayr brakes
GenOSys Online conditions monitoring
H Current switch-off brake
Housing of limit switches with or without gearboxes MVA-MVB
HVAC Drive H300 The HVAC Drive H300 variable frequency AC drive (VFD)
- Datasheet HVAC H300 -
- Guide de mise en service - SI-I/O -
- H300 High IP Datasheet -
- HVAC Drive H300 - Standard and High IP - User Guide -
- HVAC-Drive-H300-Installation-and-Commisioning-Guide-EN The H300 is a high performance open loop AC drive specifically designed for use in building automation / Commercial HVAC/R applications.
- Keypad Blanking Cover Installation Sheet Unidrive M600, M700, M800 Keypad Blanking Cover Installation Sheet
- KI-485 Adaptor Installation Sheet The KI-485 Adaptor provides two parallel RJ45 connectors allowing easy daisy chaining for 485 communications
- Option Module Installation Sheet: Automation (I/O Expansion) Installation of an SI option module
- Option Module Installation Sheet: Fieldbus Installation of an SI option module
- Remote Keypad RTC Installation Sheet -
- SI-BACnet IP User Guide -
- SI-CANopen V2 User Guide -
- SI-DeviceNet User Guide -
- SI-Ethernet User Guide -
- SI-I/O 24 Plus User Guide -
- SI-Interbus User Guide -
- SI-POWERLINK User Guide -
- SI-PROFIBUS User Guide -
- SI-PROFINET V2 User Guide -
- Size 3 and 4 UL Conduit Box Installation Sheet This document covers the UL conduit box mounting instructions for Unidrive M600 / M70X, F300, H300, E200 & E300 frame size 3 & 4 drives and derivatives.
- Size 3 Brake Resistor Installation Sheet This braking resistor has been especially designed to be mounted within the heatsink of the Unidrive M600 / M70X, F300, H300, E200 & E300 size 3
- Size 3 DC Bus Paralleling Installation Sheet This document covers DC bus paralleling instructions for Unidrive M600 / M70X, F300, H300, E200 & E300 size 3 drives.
- Size 3 Through Panel Mounting Kit Installation Sheet This document covers through-panel mounting instructions for Unidrive M600 / M70X, F300, H300, E200 & E300 Size 3 drives.
- Size 3 Tile Mounting Installation Sheet This document covers ‘Tile Mounting’ instructions for Unidrive M600 / M70X, F300, H300, E200 & E300 size 3 drives.
- Size 4 and 5 Brake Resistor Installation Sheet This braking resistor has been especially designed to be mounted within the chassis of the Unidrive M600 / M70X, F300, H300, E200 & E300 size 4 and 5.
- Size 4 DC Bus Paralleling Installation Sheet This document covers DC bus paralleling instructions for Unidrive M600 / M70X, F300, H300, E200 & E300 size 4 drives.
- Size 4 Retro Mounting Kit Installation Sheet This document covers Retro mounting instructions for Unidrive M600 / M70X, F300, H300, E200 & E300 Size 4 drives.
- Size 4 Through Panel Mounting Installation Sheet This document covers through-panel mounting instructions for Unidrive M600 / M70X, F300, H300, E200 & E300 Size 4 drives.
- Size 5 DC Bus Paralleling Installation Sheet This document covers DC bus paralleling instructions for Unidrive M600 / M700, F300, H300, E200 & E300 size 5 drives.
- Size 5 Through Panel Mounting Installation Sheet This document covers through-panel mounting instructions for Unidrive M600 / M70X, F300, H300, E200 & E300 Size 5 drives.
- Size 5 UL Conduit Box Installation Sheet This document covers the UL conduit box mounting instructions for Unidrive M200 to M702, F300, H300, E200 & E300 frame size 5 drives.
- Size 5 UL Conduit Box Installation Sheet (dual box) This document covers the UL conduit box mounting instructions for Unidrive M200 to M702, F300, H300, E200 & E300 frame size 5 drives.
- Size 6 Retro Mounting Kit Installation Sheet This document covers Retro mounting instructions for Unidrive M600 / M70X, F300, H300, E200 & E300 size 6 drives.
- Size 6 Through Panel Mounting Installation Sheet This document covers through-panel mounting instructions for Unidrive M600 / M70X, F300, H300, E200 & E300 Size 6 drives.
- Size 6 UL Conduit Box Installation Sheet This document covers the UL conduit box mounting instructions for Unidrive M200 to M702, F300, H300, E200 & E300 frame size 6 drives.
- Size 7 UL Conduit Box Installation Sheet This document covers the UL conduit box mounting instructions for Unidrive M200 to M702, F300, H300, E200 & E300 frame size 7 drives.
- Size 8 UL Conduit Box Installation Sheet This document covers the UL conduit box mounting instructions for Unidrive M200 to M702, F300, H300, E200 & E300 frame size 8 drives.
- Size 9 and 10 UL Conduit Box Installation Sheet This document covers the UL conduit box mounting instructions for Unidrive M200 to M702, F300, H300, E200 & E300 frame size 9 & 10 drives.
- Variateur H300 dédié HVAC - Guide pas à pas Le modèle H300 représente une gamme simple et flexible de variateurs de 1,1 kW à 500 kW disponibles en 10 tailles et quatre plages de tension d'entrée (200 V, 400 V, 575 V et 690 V).
- Variateur H300 dédié HVAC à indice IP élevé - Guide pas à pas Le modèle H300 représente une gamme simple et flexible de variateurs de 1,1 kW à 22 kW disponibles en 4 tailles et trois plages de tension d'entrée (200 V, 400 V et 575 V).
HYPER CONTROL Electronic starter for multispeed asynchronous motor
J Failsafe brake motor
K65-12B & K125-10B Voltage regulators
KAMAG Voltage regulator
KAMAG 11, 14 & 18 generators with APR63 regulator
- Electrical connection drawings
KAMAG 11, 14 & 18 generators with KCR regulator
- Electrical connection drawings
KAMAG 11, 14 & 18 generators with KCR regulator, dual rated breaker
- Electrical connection drawings
KAMAG 11, 14 & 18 generators with VR63 regulator
- Electrical connection drawings
KAMAG 14 & 18 generators with KAMAG I regulator, newer
- Electrical connection drawings
KAMAG 14 & 18 generators with KAMAG II regulator
- Electrical connection drawings
KAMAG 14 &18 generators with KAMAG I regulator
- Electrical connection drawings
KAMAG 22 generator with APR63 regulator
- Electrical connection drawings
KAMAG 22 generator with KCR-360 regulator
- Electrical connection drawings
KAMAG II Voltage regulator
KCR 160 Voltage regulator
KCR 360 Voltage regulator
KCR 560 Voltage regulator
KCR 760 Voltage regulator
KRM100 to KRM2000 retrofit instructions
KRM2000 Kato Rotor Monitoring system
L-FMV/LT-FMV Lifting interfaces
LC Three-phase induction motors with liquid cooling
- Installation and commissioning
- Simplified manual
Line drop compensator
LS 641/642/661, 841/842, 941 Alternators range
LS FFB - LSES FFB LS non IE, LSES IE2, IE3 asynchronous three phase IMfinity® motors range
- Installation notice
- Maintenance Guide
LS-FLS-FLSC-FLSB-FLSLB 3-phase TEFV induction motors (slip-ring or cage type)
LS-RS 232/485 Interface conversion
LSA 180/225 16&20&24p ATR 400 Hz
LSA 32 2p single-phase
LSA 32.1 2p single-phase
LSA 35 ACN 2p 3-phase
LSA 35/35E 2p single-phase
LSA 36 2p 1-ph single-phase
LSA 36 2p 3-ph 3-phase
LSA 36 4p single-phase
LSA 37 alternator
- Instruction manual 2&4p ATR
- Instruction manual 2&4p Shunt
- Instruction manual 2p ACC
- Instruction manual 2&4p AREP
- Instruction manual 2&4p single-phase
LSA 37.2 4p ACC
LSA 38 alternator
- Instruction manual 4p ACC
- Instruction manual 4p ACN
- Instruction manual 2p AREP
- Instruction manual 2p Shunt
- Instruction manual 2p ACC
LSA 40 Low voltage alternator
LSA 41.0 AREP
LSA 41.1/41.2/42.1/44.1 AREP 4p R 438LS
LSA 41.2 ACC 4p S6
LSA 42.0 AREP
LSA 42.1/44.1/46.1/47.1 4p R 129
LSA 42.2 2&4p 3-phase
LSA 42.2 2&4p ACT/R
LSA 42.3 Low voltage alternator
LSA 42/44+ RS 237 B
LSA 42/44/46 ACT & ACT/R
LSA 43.2 CFD BAGNERES
LSA 43.2/44.2 4p 3-phase
LSA 43.2/44.2 4p ACT/R
LSA 43.3 L7 Low voltage alternator - 2 poles
LSA 44 4p AREP
LSA 44-0 AREP
LSA 44.3 Low voltage alternator
LSA 445-465 ACT & ACT/R
LSA 445.0 AREP
LSA 46 4p AREP
LSA 46 S ACT/R
- Instruction manual ACT/R
- Instruction manual Compound
LSA 46.1/47.1 AREP 4p R 448
LSA 46.2 4p 3-phase
LSA 46.2/47.1 4p AREP
LSA 46.3 Low voltage alternator
LSA 465 S ACT/R
LSA 47 AREP 4p R 448
LSA 47.2 4p 3-phase
LSA 47.3 Low voltage alternator
LSA 475 alternator
- Instruction manual ACT/R
- Instruction manual Compound
- Instruction manual RBC
LSA 49.1 4p 3-phase
LSA 49.1 6p 3-phase
LSA 49.1 IC6 / LSA 49.1 IC8 Air/air or air/water heat exchanger
LSA 49.3 Low voltage alternator
LSA 49.3 IC6 Low voltage alternator - 4 poles
LSA 49.3 IC8 Low voltage alternator - 4 poles
LSA 49/50/51 AREP
LSA 50.1/51.2 4p 3-phase
LSA 50.2 Low voltage alternator
LSA 50.2 AGGREKO-GAS
LSA 50.2 6p 3-phase
LSA 52.2 MHV Alternator
LSA 52.3 / LSA 53.2 / LSA 54.2 Low, medium and high voltage alternators
LSA R 47.1/49.1 Cooling system
LSA R 49.1 Air/air heat exchanger
LSAH 42.3 Low voltage alternateur - Air/water heat exchanger
LSAH 44.3 Low voltage alternator - Air/water heat exchanger
LSF 46.2 Alternator
LSHRM - PLSHRM - FLSHRM Synchronous motors combining reluctance and permanent magnets
- Commissioning of Dyneo+ motors with Powerdrive F300/F600 drive
- Commissioning of Dyneo+ motors with Unidrive M70x drive without position feedback
- Dyneo+ with Unidrive M70x with position feedback Commissioning guide
- Installation, commissioning and maintenance
LSHT / FLSHT Fan motors for smoke extractor fans
- Specific recommendations for commissioning and maintenance
LSK D.C. motors
LSMV Enclosed asynchronous three-phase motors for speed variation
LSNP Positioning module
LSPM Low voltage alternator - 8 poles
LSRPM-PLSRPM Synchronous permanent magnet motors
MA & TA 2p Serie 1325
MAC 115 to 185 Compound
MAC 123 Ã 183 Compound
MAC 125 Compound
MAC 213 Ã 283 SHUNT
MAC TAC SHUNT
Manubloc 2000 Drive systems
Manubloc 3000 Drive systems
- General recommendations Addition to general manual ref. 4031
- Installation
- Lubrication kit
- Maintenance
- Specific recommendations for dust atmospheres Addition to manuals ref. 2557 & 4031
- Specific recommendations for gas atomspheres Addition to manuals ref. 2557 & 4031
MBT D.C. motors with permanent magnets
MC and FP chokes Output choke options
- Installation manual - Chokes
Mécabloc Drive systems
Mécabloc - Minibloc Drive systems
MENTOR MP DC speed controller 25 up to 7400 A
- FXMP25 - User guide Field controller
- Installation manual - Communication module - SM-CANopen Fieldbus module
- Installation manual - Communication module - SM-DeviceNet Fieldbus module
- Installation manual - Communication module - SM-EtherCAT Fieldbus module
- Installation manual - Communication module - SM-Ethernet Fieldbus module
- Installation manual - Communication module - SM-Profibus DP-V1 Fieldbus module
- MP-Keypad - Installation manual
- User guide
- User guide - Communication module - SM-CANopen Fieldbus module
- User guide - Communication module - SM-EtherCAT Fieldbus module
- User guide - Communication module - SM-Ethernet Fieldbus module
- User guide - Communication module - SM-Profibus DP-V1 Fieldbus module
- User guide - Modules de communication - SM-DeviceNet Fieldbus module
MF 100/112 D.C. motors
MFA D.C. motors
MFB D.C. motors
Minibloc MVA Drive systems
Minibloc MVA-MEVA Drive systems
Minibloc MVAB Drive systems
Minibloc MVAE Drive systems
Minibloc MVB Drive systems
Minibloc MVBE Drive systems
Minibloc MVDE Drive systems
MIS-MES K(V) A.V.R.
MNI-MNIHS Induction motors for the navy
MOAP D.C. motors
Module auto/manual
Motor-generator set Synchronous common shaft
Motors - UNIMOTOR FM Servo motor 0.7 up to 410 Nm
- Installation manual - Autosynchronous motor
MS1-MS2 D.C. motors
Multibloc 2201 Z Drive systems
Multibloc 22LC Drive systems
Multibloc 3101 & 2000 - Kits Drive systems
Multibloc 3101-2000-iA Drive systems
- General recommendations Addition to general manual ref. 2910
- Installation
- Maintenance
- Specific recommendations for commissioning and maintenance
Multibloc 3901 - TSA 50 Drive systems
Multibloc Mb 2101 Drive systems
Multibloc Mb 4101 Drive systems
MVE Electronic variable speed drive D.C.
MVS Variable speed drive
Options Résistances de freinage Options Résistances de freinage
- DBR 100W DBR 100W
- DBR2_300W-500W DBR2_300W-500W
- DBR3 1000W_1220-0010 DBR3 1000W_1220-0010
- DBR3 1500W_1220-0015 DBR3 1500W_1220-0015
- DBR3-2000W_1220-0020 DBR3-2000W_1220-0020
- DBR3-3000W_1220-0030009- DBR3-3000W_1220-0030009-
- DBR3-4500W_1220-0045 DBR3-4500W_1220-0045
- DBR3-6000W_1220-0060 DBR3-6000W_1220-0060
Orthobloc 2000 Drive systems
Orthobloc 3000 Drive systems
- General recommendations Addition to general manual ref. 3996
- Installation
- Lubrication kit
- Maintenance
- Specific recommendations for dust atmospheres Addition to manuals ref. 2557 & 3996
- Specific recommendations for gas atmospheres Addition to manuals ref. 2557 & 3996
Over/under voltage protective relay
Packaged generator Single or two-bearing - Drive-end air discharge
Paralleling module
Phase chokes Input chokes option
- Installation manual - Chokes
Planibloc 2000 Planetary geared motor
PLATINE 713 RTM & RZ
- RTM Installation and maintenance
- RZ Installation and maintenance
PLATINE 1064 Control D.C. motor excitation current
PLATINE 1126 Card
PLATINE 1274 Card
PLATINE 1444 Extension card
PLATINE 1446 Card
PLS Drip-proof 3-phase induction motors
Poulibloc Drive systems
Poulibloc 2000 Backstop
Poulibloc 2000-3000 Drive systems
- General recommendations Addition to general manual ref. 3097
- Installation
- Installation Backstop Poulibloc 2000
- Maintenance
- Specific recommendations for dust atmospheres Addition to manuals ref. 2557 & 3097
POWERDRIVE F300 Variable speed drive 1.1 kW up to 2,8 MW
- Commissioning of Dyneo+ motors with Powerdrive F300/F600 drive
- Parameter Guide, Open-Loop Mode
- Parameter Guide, RFC-A mode
- Parameter Guide, RFC-S mode
- SD Pump F300 - Quick start commissioning guide Pumping Solution
- User guide F300 (sizes 3 to 11)
- User guide F300 (sizes 3 to 11)
POWERDRIVE FX Drive with dynamic braking 22 up to 90 kW
- Commissioning manual
- Installation manual
- MDX-CANopen - User guide
- MDX-Encoder & Resolver - Installation manual Feedback options
- MDX-Ethernet - User guide
- MDX-Ethernet/IP - User guide
- MDX-I/O Lite - Installation and commissioning manual
- MDX-I/O M2M - Installation and commissioning manual
- MDX-Keypad - Installation manual
- MDX-Modbus - User guide
- MDX-Profibus - User guide
- MDX-Profinet - User guide
- MODULES-MDX - Installation manual
POWERDRIVE MD Variable speed drive 45 up to 2800 kW
- Commissioning manual - Variable speed drive in cubicle
- Commissioning manual - Variable speed drive in cubicle - Addendum to manual ref. 3871 indices de & e (Human Machine Interface)
- Commissioning manual - Variable speed drive on chassis
- Handling instructions manual - Variable speed drive in cubicle
- Installation manual - Variable speed drive in cubicle 6 pulses version
- Installation manual - Variable speed drive in cubicle Regen version
- Installation manual - Variable speed drive in cubicle - Addendum to manuals ref. 3902, 4001, 4443
- Installation manual - Variable speed drive on chassis Dual output version
- Installation manual - Variable speed drive on chassis - Addendum to manual ref. 3865
- Installation notice - Variable speed drive in cubicle Liquid-cooled version
- Keypad-LCD - Installation manual Setting keypad
- MD-Encoder - Installation manual Speed feekback option
- PX-IO - Installation and commissioning manual Additional inputs/outputs
- PX-Modbus - Installation manual Communication module
- SM-CANopen - Installation manual Fieldbus module
- SM-CANopen - User guide Fieldbus module
- SM-Profibus DP - Installation manual Fieldbus module
- SM-Profibus DP - User guide Fieldbus module
POWERDRIVE MD Smart Variable speed drive
- Commissioning manual Powerdrive MD Smart
- Guide d'installation Powerdrive MD Smart MS_60 Ã 270 TN
- Guide d'installation Powerdrive MD Smart Série MD3S
- Installation Guide Powerdrive MD Smart T0 MD3 Series 33TN to 75TN -
- Powerdrive MD Smart Equipment MD3 serie - Installation guide
- Powerdrive MD Smart MD3 IP00 Chassis serie - Integration Guide
- Powerdrive MD Smart MD3 Series - Commissioning manual
POWERDRIVE MD2 Variable speed drive
- Handling instructions manual - Powerdrive MD2 in cubicle
- MDX manual - Feedback options
- MDX-CANopen - User guide
- MDX-Ethernet - User guide
- MDX-Ethernet/IP - User guide
- MDX-I/O Lite - Installation and commissioning manual
- MDX-I/O M2M - Installation and commissioning manual
- MDX-Keypad - Installation manual
- MDX-Modbus - User guide
- MDX-Profibus - User guide
- MDX-Profinet - User guide
- MODULES-MDX - Installation manual
- Powerdrive MD2 (all variations) - Commissioning manual
- POWERDRIVE MD2CS (Chassis-mounted variable speed drive) - Installation manual
- POWERDRIVE MD2MS - Handling Instructions
- POWERDRIVE MD2MS - Installation manual
- POWERDRIVE MD2R (Active front end variable speed drive in cubicle) - Installation manual
- POWERDRIVE MD2S (Variable speed drive in cubicle) - Installation manual
- POWERDRIVE MD2SL (Liquid cooled variable speed drive in cubicle) - Installation manual
PRESTIBLOC Protected motors with rotor in short circuit
PROXIDRIVE IP66 variable speed drive 0.37 up to 7.5 kW
- Advanced user manual
- Installation and commissioning manual
- Installation and maintenance manual - Addendum to manual ref. 3739
- Installation and maintenance manual - Erratum to manual ref. 3739
- Keypad-LCD - Installation manual Setting keypad
- PX-Brake Contactor - Installation manual Brake control
- PX-Brake Resistor - Installation manual Braking resistors
- PX-Cabling Kit - Installation manual IP66 protection kit
- PX-Disconnect - Installation manual IP65 switch
- PX-Encoder - Installation manual Encoder input control
- PX-IO - Installation and commissioning manual Additional inputs/outputs
- PX-Modbus - Installation manual Communication module
- SM-CANopen - Installation manual Fieldbus module
- SM-CANopen - User guide Fieldbus module
- SM-Profibus DP - Installation manual Fieldbus module
- SM-Profibus DP - User guide Fieldbus module
- XPressKey - Installation manual Cloning key
R120 Analog AVR
R121 Analog AVR
R129 A.V.R.
R130 (replaces R181) Analog AVR
R139 A.V.R.
R150 Analog AVR
R180 Analog AVR
R181 A.V.R.
R200 AVR
R220 Analog AVR
R220 VSG + CCM AVR
R221 Analog AVR
R230 A.V.R.
R231 A.V.R.
R238 A.V.R.
R241 A 400 Hz A.V.R.
R250 Analog AVR
R251 A.V.R.
R438 A.V.R.
R438 LS & R448 LS A.V.R.
R448 & R448 V50 A.V.R.
R449 A.V.R.
R449 rev f A.V.R.
R450 Faston A.V.R.
R450 M&T A.V.R.
R452 A.V.R.
R600 A.V.R.
R610 A.V.R.
R610 A.V.R.
R630 A.V.R.
R630 A.V.R.
R630 AREP/PMG A.V.R.
R710 - R720 Booster monitor
R713 - R723 Module
R725 A Module
R726 Module
R729 Module
R731 Module
R734 Module
Revolving field alternating current generator with direct connected brush type rotating DC exciters
RF brake resistor option Braking resistors
- Installation manual - Resistors
RF brake resistor option Braking resistors
- Selection guide of braking resistors for drives Unidrive M, Powerdrive F300 and Powerdrive MD2
RS128 A A.V.R.
RS128-0 A.V.R.
RS237 C A.V.R.
SE3000 Control electronic
Servo gearboxes Mjd Drive systems
Servo gearboxes Pje Dynabloc hd Drive systems
Servo gearboxes Pjl Drive systems
Servo gearboxes Pjn Drive systems
Servo gearboxes Pjr Dynabloc hd Drive systems
Servo gearboxes Pjs Drive systems
SMV Autosynchronous servomotor drive system
SMV 3305 Autosynchronous servomotor variable speed drive
SMV DS Autosynchronous motors
SMV DU Autosynchronous motors
SMV N - SMV NP Autosynchronous servomotor drive system
Standard AC generator Single or two-bearing - Drive-end air discharge
START OPTIONS Options for Digistart STV 2313
Synchronous machine
T-FMV 32 Transistor braking
TAC 243 to 283 Compound
TAL 040 Low voltage alternator
TAL 042 Low voltage alternator
TAL 044 Low voltage alternator
TAL 046 Low voltage alternator
TAL 047 Low voltage alternator
TAL 0473 Low voltage alternator
TAL 049 Low voltage alternator
TAL A40 Low voltage alternator (China)
TAL A42 Low voltage alternator (China)
TAL A44 Low voltage alternator (China)
TAL A46 Low voltage alternator (China)
TAL A473 Low voltage alternator (China)
TAL A49 Low voltage alternator (China)
Tcb Drive systems
Test product test
TLS-TD Gearboxes
TMD Unidirectional single-phase speed controller for D.C. motors
TMS Variable speed drive
TOPSTART Electronic starter
Traction alternator Separately excited
TRANSAX 40 Variable speed drive
TRANSAX 51 Variable speed drive
TTC RV Variable speed drive
TTC UD Variable speed drive
TTS 3-phase variable speed drive
U & AP Mounting for Cb, Ot, Mub
UMV 2301 AS Speed controller for asynchronous motors
UMV 3301 Open or closed loop flux vector controller
UMV 4301 Open and closed loop speed controllers for asynchronous and synchronous motors
- Instruction manual
- Setting and synoptic views
UNIDRIVE M100/101 To access the full documents collection, click here
- Power Installation Guide (sizes 1 to 4)
- Quick start commissioning guide M100, M101 (sizes 1 to 4)
- Step by step Guide M100 to M300 (sizes 1 to 4)
- Unidrive M100 Parameter Reference Guide
- User guide, Control M100/M101 (sizes 1 to 4)
UNIDRIVE M200/201 To access the full documents collection, click here
- French Unidrive M frame7 to 10 Power Installation Guide (sizes 7 to 10)
- Parameter Reference Guide Issue (Open-Loop)
- Power Installation Guide (sizes 1 to 4)
- Quick start commissioning guide M200, M201 (sizes 1 to 4)
- Quick start commissioning guide - control M200, M201 (sizes 5 and upward)
- SI-I/O - User guide
- Step by step Guide M200/201 and M300 (sizes 1 to 4)
- Step by step Guide M200/201 and M300 (sizes 5 to 9)
- Unidrive M frame 5 and 6 Power Installation Guide (sizes 5 and 6)
- Unidrive M200 Parameter Reference Guide (RFC-A)
- User guide, Control M200/M201
UNIDRIVE M300 To access the full documents collection, click here
- French Unidrive M frame 7 to 10 Power Installation Guide (sizes 7 to 10)
- Power Installation Guide (sizes 1 to 4)
- Quick commissioning guide Unidrive M300/ HS30
- Quick start commissioning guide - control M300 (sizes 5 and upward)
- Quick start commissioning guide M300 (sizes 1 to 4)
- SI-I/O - User guide
- Step by step Guide M200/201 and M300 (sizes 1 to 4)
- Step by step Guide M200/201 and M300 (sizes 5 to 9)
- Unidrive M frame 5 and 6 Power Installation Guide (sizes 5 and 6)
- Unidrive M300 Parameter Reference Guide
- Unidrive M300 Parameter Reference Guide (Open-Loop)
- User guide, Control M300
UNIDRIVE M400 To access the full documents collection, click here
- Power Installation Guide (sizes 1 to 4)
- Quick start commissioning guide - control M400 (sizes 5 and upward)
- Quick start commissioning guide M400 (sizes 1 to 4)
- SD Pump M400
- SI-I/O - User guide
- Step by step Guide M400 (sizes 1 to 4)
- Step by step Guide M400 (sizes 5 to 9)
- Unidrive M frame 5 and 6 Power Installation Guide (sizes 5 and 6)
- Unidrive M frame 7 to 10 Power Installation Guide (sizes 7 to 10)
- Unidrive M400 Parameter Reference Guide (Open-Loop)
- Unidrive M400 Parameter Reference Guide (RFC-A)
- User guide, Control M400
UNIDRIVE M600 To access the full documents collection, click here
- French Unidrive M frame 11 Power Installation Guide (size 11)
- French Unidrive M frame 7 to 10 Power Installation Guide (sizes 7 to 10)
- Quick start commissioning guide, Control M600
- SI-Encoder - User guide
- SI-I/O - User guide
- Unidrive M Frame 3 and 4 Power Installation Guide (sizes 3 and 4)
- Unidrive M frame 5 and 6 Power Installation Guide (sizes 5 and 6)
- Unidrive M600 Parameter Reference Guide (Open-Loop)
- Unidrive M600 Parameter Reference Guide (Regeneration)
- Unidrive M600 Parameter Reference Guide (RFC-A)
- Unidrive M600 Parameter Reference Guide (RFC-S)
- User guide M600
UNIDRIVE M700 To access the full documents collection, click here
- Commissioning of Dyneo+ motors with Unidrive M70x drive with position feedback
- Commissioning of Dyneo+ motors with Unidrive M70x drive without position feedback
- French Unidrive M frame 11 Power Installation Guide (size 11)
- French Unidrive M frame 7 to 10 Power Installation Guide (sizes 7 to 10)
- Parameter Reference Guide (Open-Loop)
- Parameter Reference Guide (Regeneration)
- Parameter Reference Guide (RFC-A)
- Parameter Reference Guide (RFC-S)
- Quick start commissioning guide, Control (M700/M701/HS70/HS71)
- SI-EDL - User guide Winding - Unwinding Solution
- SI-Encoder - User guide
- SI-I/O - User guide
- SI-LVG - User guide, Lifting solution
- SI-POS - User guide Positioning Solution
- Unidrive M Frame 3 and 4 Power Installation Guide (sizes 3 and 4)
- Unidrive M frame 5 and 6 Power Installation Guide (sizes 5 and 6)
- User guide M700/M701/M702
UNIDRIVE M701 To access the full documents collection, click here
- Commissioning of Dyneo+ motors with Unidrive M70x drive without position feedback
- Dyneo+ with Unidrive M70x with position feedback Commissioning guide
- French Unidrive M frame 11 Power Installation Guid (size 11)
- French Unidrive M frame 7 to 10 Power Installation Guide (sizes 7 to 10)
- Parameter Reference Guide (Open-Loop)
- Parameter Reference Guide (Regeneration)
- Parameter Reference Guide (RFC-A)
- Parameter Reference Guide (RFC-S)
- Quick start commissioning guide, Control (M700/M701/HS70/HS71)
- SI-EDL - User guide Winding - Unwinding Solution
- SI-Encoder - User guide
- SI-I/O - User guide
- SI-LVG - User guide, Lifting solution
- SI-POS - User guide Positioning Solution
- Unidrive M Frame 3 and 4Power Installation Guide (sizes 3 and 4)
- Unidrive M frame 5 and 6 Power Installation Guide (sizes 5 and 6)
- User guide M700/M701/M702
UNIDRIVE M702 To access the full documents collection, click here
- Commissioning of Dyneo+ motors with Unidrive M70x drive without position feedback
- Dyneo+ with Unidrive M70x with position feedback Commissioning guide
- French Unidrive M frame 11 Power Installation Guide (size 11)
- French Unidrive M frame 7 to 10 Power Installation Guide (sizes 7 to 10)
- Parameter Reference Guide (Open-Loop)
- Parameter Reference Guide (Regeneration)
- Parameter Reference Guide (RFC-A)
- Parameter Reference Guide (RFC-S)
- Quick start commissioning guide, Control (M702/HS72)
- SI-EDL - User guide Winding - Unwinding Solution
- SI-Encoder - User guide
- SI-I/O - User guide
- SI-LVG - User guide, Lifting solution
- SI-POS - User guide Positioning Solution
- Unidrive M Frame 3 and 4 Power Installation Guide (sizes 3 and 4)
- Unidrive M frame 5 and 6 Power Installation Guide (sizes 5 and 6)
- User guide M700/M701/M702
UNIDRIVE SP Universal modular drive 0.75 up to 1900 kW
- Advanced user guide
- Cables - Installation manual
- Installation and commissioning manual - Solution - Lifting
- Installation and commissioning manual - Solution - Positioning
- Installation and commissioning manual - Solution - Synchronization
- Installation and commissioning manual - Solution - Winding-unwinding solution with cell
- Installation and commissioning manual - Solution - Winding-unwinding with analogue references
- Installation and commissioning manual - Solution - Winding-unwinding with encoder
- Installation and commissioning manual addendum - Addendum to manuals ref. 3616fr and 3890en
- Quick start commissioning guide - Solution - Positioning
- Quick start commissioning guide - Solution - Synchronization
- Quick start commissioning guide - Solution - Winding-unwinding solution with analogue references
- Quick start commissioning guide - Solution - Winding-unwinding with cell
- RFI filters - Installation manual
- Short form guide
- SM-Applications - Installation manual Applications module
- SM-Applications - User guide Applications module
- SM-Applications Lite - Installation manual Applications Lite module
- SM-Applications Lite - User guide Applications Lite module
- SM-CANopen - Installation manual Fieldbus module
- SM-CANopen - User guide Fieldbus module
- SM-DeviceNet - Installation manual Fieldbus module
- SM-DeviceNet - User guide Fieldbus module
- SM-Encoder Plus - Commissioning manual Incremental encoder input module
- SM-EtherCAT - Installation manual Fieldbus module
- SM-EtherCAT - User guide Fieldbus module
- SM-Ethernet - Installation manual Fieldbus module
- SM-Ethernet - User guide Fieldbus module
- SM-I/O Lite, SM-I/O Timer - Commissioning manual Extra input/output module
- SM-I/O Lite, SM-I/O Timer - Installation manual Extra input/output module
- SM-I/O Plus - Commissioning manual Extra input/output module
- SM-I/O Plus - Installation manual Extra input/output module
- SM-Interbus S - Installation manual Fieldbus module
- SM-Interbus S - User guide
- SM-Keypad - Commissioning manual Keypad
- SM-Keypad LCD - Installation manual LCD keypad
- SM-Profibus DP-V1 - Installation manual Fieldbus module
- SM-Profibus DP-V1 - User guide Fieldbus module
- SM-Resolver - Commissioning manual Resolver interface module
- SM-Resolver - Installation manual Resolver interface module
- SM-Universal Encoder Plus - Commissioning manual Universal encoder input module
- SP0/SPz Keypad - Installation manual
- User guide
- User guide SPM
UNIMOTOR HD Servo motor 0.72 up to 18.8 Nm
- Installation manual - Autosynchronous motor
UNIMOTOR UM Autosynchronous motor
UNIMOTOR-UNIDRIVE SP-DYNABLOC Drive systems
UNIPAD Universal keypad
UNISTART Electronic starter
Various options Accessories drives
- Option - Current transmitter JK 6010
- Option - Galvanic isolator 4 outputs ISOL4/N
- Option - Insulation encoder OPTO-COD
- Option - Universal 4 output ramps RU/4
- Option - Universal process transmitter JK 3000
Various options Accessories drives
- Option - Encoder interface (HD-15 pin conversion/terminals 15) INTERCOD 15
VARMECA Variable speed motors or geared motors
VARMECA 10 Variable speed motors or geared motors
- Instruction manual
- Parameter-setting manual
VARMECA 14 Variable speed motors or geared motors
VARMECA 20 Variable speed motors or geared motors
- Instruction manual
- Parameter-setting manual
VARMECA 30 Variable speed motors or geared motors
- Extended functions
- Instruction manual
- Parameter-setting manual
VE Electronic controllers for MVE drives
VE-RG Reversible single-phase inverter for D.C. motor
VE/A Single-phase controller for D.C. motors
VE/B - VE/RG DC speed controller 4 up to 100
- Installation and commissioning manual - VE/RG 7 to 37
VE/RG Variable speed drive for D.C. motors MFA
Verelec Electric jacks
VES 220 Single-phase variable speed drive for D.C. motor
VLB Vibrating motors
VMR Reversible single-phase inverter for D.C. motor
VMV 3305 Inverter flux vector control
- Installation and maintenance - 1.5T to 13T
- Installation and maintenance - 16T to 100T
Voltage regulator (800-84132-10/800-84132-13)
Voltage regulators (P/N 800-84132-07 & 80084132-11)
Voltage regulators magnetic amplifier single-phase
Voltage regulators magnetic amplifier three-phase
Voltage/frequency sensor
VTR Reversible 3-phase speed controller for D.C. motor
VTR-D 3-phase controller for D.C. motor
VTU One way 3-phase speed controller for D.C. motor
VTU-N Unidirectional 3-phase speed controller for D.C. motor
Wind turbine generator Synchronous and doubly-fed - Induction generator